x
S
W
E
L
L
C
O
Technical Details
TECHNICAL SPECIFICATION FOR DIGTAL WALL TILES
| SR, NO. | CHARACTERISTICS | REQUREMENT AS PER ISO 13006 BIa / EN 176 BI a | ISO / EN TESTING METHOD |
|---|---|---|---|
| A | DIMENSION & SURFACE QUALITY | ||
| 1 | Deviation in Length & width | Max. +/- 0.5% | EN-98;IS:13630 (Part 1) |
| 2 | Deviation in thickness | Max. +/- 5% | EN-98;IS:13630 (Part 1) |
| 3 | Surface flatness (Warpage) | Max. +/- 0.5% | EN-98;IS:13630 (Part 1) |
| 4 | Rectangularity (Squareness) | Max. +/- 0.5% | EN-98;IS:13630 (Part 1) | B | PHYSICAL PROPERTIES |
| 1 | Water Absorption | >/= 10% | EN-99;IS:13630 (Part 2) |
| 2 | Scratch Hardness of Surface (Mohs) | Min. 3 | EN-101;IS:13630 (Part 13) |
| 3 | Resistance to Surface Abrasion (of tiles intended for use on floors) | Abration class shall be specified by the manufacturer | EN-154;IS:13630 (Part 11) |
| 4 | Crazing Resistance | Required | EN-105;IS:13630 (Part 9) |
| 5 | Modulus of Rupture | Min.153 Kg/cm2 | EN-100;IS:13630 (Part 6) | C | CHEMICAL / THERMAL PROPERTIES |
| 1 | STAINING RESISTANCE | MIN CLASS 2 | EN-122;IS:13630 (Part 8) |
| 2 | HOUSEHOLD CHEMICALS | MIN CLASS B | EN-122;IS:13630 (Part 8) |
| 3 | THERMAL SHOCK | RESISTANT TO 10 CYCLES | EN-104;IS:13630 (Part 5) |
| 4 | THERMAL EXPANSION | MAX-9E-06 | EN-104;IS:13630 (Part 5) |
TECHNICAL SPECIFICATION FOR DOUBLE CHARGE PORCELAIN
| SR, NO. | CHARACTERISTICS | REQUREMENT AS PER ISO 13006 BIa / EN 176 BIa | ISO / EN TESTING METHOD |
|---|---|---|---|
| A | DIMENSION & SURFACE QUALITY | ||
| 1 | Deviation in Length | ± 0.6% | ISO-10545-2 |
| 2 | Deviation in Thickness | ± 0.5% | ISO-10545-2 |
| 3 | Straightness of Sides | ± 0.5% | ISO-10545-2 |
| 4 | Rectangularity | ± 0.6% | ISO-10545-2 |
| 5 | Surface Flatness | ± 0.5% | ISO-10545-2 |
| 6 | Glosiness | - | GLOSSMETER |
| B | STRUCTURAL PROPERTIES | ||
| 1 | Water absorption * | < 0.5% | ISO-10545-3 |
| 2 | Density (g/cc) | > 2 | DIN 51082 |
| C | MASSIVE MECHANICAL PROPERTIES | ||
| 1 | Flexural Strength * | > 27 N/mm ² | ISO-10545-4 |
| 2 | Breaking Strength * | 1113 N | ISO-10545-4 |
| D | SURFACE MECHANICAL PROPERTIES | ||
| 1 | Mohs hardness * | > 6 | EN 101 |
| 2 | Abrasion resistance | >175 mm ³ | ISO-10545-6 |
| 3 | Skid Resistance (Friction Coefficient) | > 0.4 | ISO-10545-17 |
| E | CHEMICAL PROPERTIES | ||
| 1 | Frost resistance | Frost proof | ISO-10545-12 |
| 2 | Chemical Resistance | No Damage | ISO-10545-13 |
| 3 | Stain Resistance | Resistant | ISO-10545-14 |
| F | THERMAL PROPERTIES | ||
| 1 | Thermal Shock Resistance | No Damage | ISO-10545-9 |
| 2 | Thermal Expansion | < 9 x 10-6 | ISO-10545-8 |
| 3 | Moisture Expansion | Nil | ISO-10545-10 |
TECHNICAL SPECIFICATION FOR FULLBODY PORCELAIN
| SR, NO. | CHARACTERISTICS | REQUREMENT AS PER ISO 13006 BIa / EN 176 BIa | ISO / EN TESTING METHOD |
|---|---|---|---|
| A | DIMENSION & SURFACE QUALITY | ||
| 1 | Deviation In Length & Width | ± 0.60% | ISO-10545-2 |
| 2 | Deviation In Thickness | ± 5.00% | ISO-10545-2 |
| 3 | Straightness Of Sides | ± 0.50% | ISO-10545-2 |
| 4 | Rectangularity | ± 0.60% | ISO-10545-2 |
| 5 | Surface Flatness | ± 0.50% | ISO-10545-2 |
| 6 | Glosiness | ACCORDING TO SURFACE FINISH | GLOSSMETER |
| B | STRUCTURAL PROPERTIES | ||
| 1 | Water Absorption | ≤ 0.50% | ISO-10545-3 |
| 2 | Density (g/cc) | > 2 | DIN 51082 |
| C | MASSIVE MECHANICAL PROPERTIES | ||
| 1 | Flexural Strength * | > 35 N/mm ² | ISO-10545-4 |
| 2 | Breaking Strength | 1300 N | ISO-10545-4 |
| D | SURFACE MECHANICAL PROPERTIES | ||
| 1 | Moh’s Hardness | >6 | EN101 |
| 2 | Abrasion resistance | < 210 mm ³ | ISO-10545-6 |
| 3 | Skid Resistance (Friction Coefficient) | > 0.40 | ISO-10545-17 |
| E | CHEMICAL PROPERTIES | ||
| 1 | Frost Resistance | Frost Proof | ISO-10545-12 |
| 2 | Chemical Resistance | No Damage | ISO-10545-13 |
| 3 | Stain Resistance | Resistance | ISO-10545-14 |
| F | THERMAL PROPERTIES | ||
| 1 | Thermal Shock Resistance | No Damage | ISO-10545-9 |
| 2 | Thermal Expansion | < 9 x 10-6 | ISO-10545-8 |
| 3 | Moisture Expansion | Nil | ISO-10545-10 |
Coming Soon
- Polished PGVT
- High Glossy
- Matt & Rocker (GVT)
GLAZED PORCELAIN TILES - POLISHED (PGVT)TECHNICAL SPECIFICATION
| CHARACTERISTIC | STANDARD AS PER ISO-13006/EN14411 GROUP Bla | Swellco VALUE | TEST METHOD |
|---|---|---|---|
| REGULATORY PROPERTIES | |||
| Deviation in length & width | ± 0.5% | ± 0.1% | ISO-10545-2 |
| Deviation in thickness | ± 5.0% | ± 4.0% | ISO-10545-2 |
| Straightness in sides | ± 0.5% | ± 0.1% | ISO-10545-2 |
| Rectangularity | ± 0.5% | ± 0.1% | ISO-10545-2 |
| Surface flatness | ± 0.5% | ± 0.2% | ISO-10545-2 |
| Surface quality | Min. 95% defect free | > 95% | ISO 10545-2 |
| Glossiness | > 90 GU | > 92 GU | Gloss meter 60° |
| STRUCTURAL PROPERTIES | |||
| Water absorption | < 0.50% | < 0.05% | ISO-10545-3 |
| Apparent density | > 2.0 g/cc | > 2.20 g/cc | DIN 51082 |
| MASSIVE MECHANICAL PROPERTIES | |||
| Modulus of rupture | > 35 N/mm2 | > 40 N/mm2 | ISO-10545-4 |
| Breaking strength | > 1300 N | > 1800 N | ISO-10545-4 |
| Impact resistance (COR) | >0.55 | >0.55 | ISO-10545-5 |
| SURFACE MECHANICAL PROPERTIES | |||
| Surface abrasion resistance | Declared class | Class PEI 4 (2100 revolutions) | EN 154 |
| Surface scratch hardness (Mohs scale) | 5 | 5 | EN 101 |
| THERMO HYGROMRTRIC PROPERTIES | |||
| Frost resistance | Test passed in accordance with test method | Pass | ISO-10545-12 |
| Thermal shock resistance | Min. 10 cycle | Pass | ISO-10545-9 |
| Moisture expansion | 0.06mm/m | 0.01mm/m | ISO-10545-10 |
| Thermal expansion (COE) | Max. 9.0 x 10 | Max. 6.5 x 10 | ISO-10545-8 |
| Crazing resistance | No damage | No damage | ISO-10545-11 |
| CHEMICAL PROPERTIES | |||
| Chemical resistance | No damage | No damage | ISO-10545-13 |
| Stain resistance | Min. Class 3 | Class 5 | ISO-10545-14 |
| SEFETY PROPERTIES | |||
| Slip resistance (COF) | Declared value | > 0.40 dry, <0.40 wet | ISO-10545-17 |
| Reaction to fire Class | A1 or A1 fl | Class A1 - A1 fl | N.A. |
GLAZED PORCELAIN TILES - HIGH GLOSSY (PGVT)
| CHARACTERISTIC | STANDARD AS PER ISO-13006/EN14411 GROUP Bla | Swellco VALUE | TEST METHOD |
|---|---|---|---|
| REGULATORY PROPERTIES | |||
| Deviation in length & width | ± 0.5% | ± 0.1% | ISO-10545-2 |
| Deviation in thickness | ± 5.0% | ± 4.0% | ISO-10545-2 |
| Straightness in sides | ± 0.5% | ± 0.1% | ISO-10545-2 |
| Rectangularity | ± 0.5% | ± 0.1% | ISO-10545-2 |
| Surface flatness | ± 0.5% | ± 0.2% | ISO-10545-2 |
| Surface quality | Min. 95% defect free | > 95% | ISO 10545-2 |
| Colour difference | Unaltered | Unaltered | ISO-10545-16 |
| Glossiness | > 90 GU | > 94 GU | Gloss meter 60° |
| STRUCTURAL PROPERTIES | |||
| Water absorption | < 0.50% | < 0.05% | ISO-10545-3 |
| Apparent density | > 2.0 g/cc | > 2.20 g/cc | DIN 51082 |
| MASSIVE MECHANICAL PROPERTIES | |||
| Modulus of rupture | > 35 N/mm2 | > 40 N/mm2 | ISO-10545-4 |
| Breaking strength | > 1300 N | > 1800 N | ISO-10545-4 |
| Impact resistance (COR) | >0.55 | >0.55 | ISO-10545-5 |
| SURFACE MECHANICAL PROPERTIES | |||
| Surface abrasion resistance | Declared class | Class PEI 3 | EN 154 |
| Surface scratch hardness (Mohs scale) | 5 | 5 | EN 101 |
| THERMO HYGROMRTRIC PROPERTIES | |||
| Frost resistance | Test passed in accordance with test method | Pass | ISO-10545-12 |
| Thermal shock resistance | Min. 10 cycle | Pass | ISO-10545-9 |
| Moisture expansion | 0.06mm/m | 0.01mm/m | ISO-10545-10 |
| Thermal expansion (COE) | Max. 9.0 x 10 | Max. 6.5 x 10 | ISO-10545-8 |
| Crazing resistance | No damage | No damage | ISO-10545-11 |
| CHEMICAL PROPERTIES | |||
| Chemical resistance | No damage | No damage | ISO-10545-13 |
| Stain resistance | Min. Class 3 | Class 5 | ISO-10545-14 |
| SEFETY PROPERTIES | |||
| Slip resistance (COF) | Declared value | > 0.40 dry, <0.40 wet | ISO-10545-17 |
| Reaction to fire | Class A1 or A1 fl | Class A1 - A1fl | N.A |
GLAZED PORCELAIN TILES - MATT, MATT WITH STRUCTURE, ROCKER (GVT)
| CHARACTERISTIC | STANDARD AS PER ISO-13006/EN14411 GROUP Bla | Swellco VALUE | TEST METHOD |
|---|---|---|---|
| REGULATORY PROPERTIES | |||
| Deviation in length & width | ± 0.5% | ± 0.1% | ISO-10545-2 |
| Deviation in thickness | ± 5.0% | ± 4.0% | ISO-10545-2 |
| Straightness in sides | ± 0.5% | ± 0.1% | ISO-10545-2 |
| Rectangularity | ± 0.5% | ± 0.1% | ISO-10545-2 |
| Surface flatness | ± 0.5% | ± 0.2% | ISO-10545-2 |
| Surface quality | Min. 95% defect free | > 95% | ISO 10545-2 |
| STRUCTURAL PROPERTIES | |||
| Water absorption | < 0.50% | < 0.05% | ISO-10545-3 |
| Apparent density | > 2.0 g/cc | > 2.20 g/cc | DIN 51082 |
| MASSIVE MECHANICAL PROPERTIES | |||
| Modulus of rupture | > 35 N/mm2 | > 40 N/mm2 | ISO-10545-4 |
| Breaking strength | > 1300 N | > 1800 N | ISO-10545-4 |
| Impact resistance (COR) | >0.55 | >0.55 | ISO-10545-5 |
| SURFACE MECHANICAL PROPERTIES | |||
| Surface abrasion resistance | Declared class | Class PEI 4 (2100 revolutions) | EN 154 |
| Surface scratch hardness (Mohs scale) | 5 | 5 | EN 101 |
| THERMO HYGROMRTRIC PROPERTIES | |||
| Frost resistance | Test passed in accordance with test method | Pass | ISO-10545-12 |
| Thermal shock resistance | Min. 10 cycle | Pass | ISO-10545-9 |
| Moisture expansion | 0.06mm/m | 0.01mm/m | ISO-10545-10 |
| Thermal expansion (COE) | Max. 9.0 x 10 | Max. 6.5 x 10 | ISO-10545-8 |
| Crazing resistance | No damage | No damage | ISO-10545-11 |
| CHEMICAL PROPERTIES | |||
| Chemical resistance | No damage | No damage | ISO-10545-13 |
| Stain resistance | Min. Class 3 | Class 5 | ISO-10545-14 |
| SEFETY PROPERTIES | |||
| Slip resistance (COF) | Declared value | > 0.40 dry, > 0.40 wet | ISO-10545-17 |
| Reaction to fire | Class A1 or A1fl | Class A1 - A1fl | N.A. |
